UHF SPECIFICATIONS:
- RF carrier frequency range: 470-810MHz
- working range (line of sight): standard density mode: 75 m and high density mode: 40m
- RF sensitivity: -90 dBm at 10 to 5 BER
- RF tuning step size: 25 kHz, varies by region
- image rejection: >70 dB, typical
- spurious rejection: >80 dB, typical
- connector type: SMA (shell=ground, center=signal)
- impedance: 50 Ohm
SHOWLINK SPECIFICATIONS:
- frequency range: 2.40 to 2.4835 GHz (16 channels)
- working range: 30m
- connector type: SMA (shell=ground, center=signal)
- impedance: 50 Ohm
- ShowLink antenna power: 2.5 dBm EIRP
- antenna type: 1 Omni 2.4 GHz
- network type: IEEE 802.15.4
AUDIO OUTPUT:
- gain adjustment range: -18 to +42 dB in 1 dB steps (plus mute setting)
- impedance: 66 Ohm, typical, TA3 out
- full scale output ( 200 kOhm load): +9 dBV
- phantom power protection: yes
- audio frequency response: 20 Hz to 20 kHz
- dynamic range: 129 dB
- total harmonic distortion: 0.0006% at -6 dBFS, 1 kHz
- system audio polarity: positive pressure on diaphragm produces positive voltage on audio+ with respect to audio
- analog output latency: standard density mode 2.08 ms and high density mode 2.96 ms
USB INPUT (used for firmware updates):
- connector type: USB-C
- USB protocol: USB 2.0
- USB role: peripheral (upstream-facing port)
- USB power delivery: none
POWER:
- DC power requirements: 6V DC to 18V DC
- thermal power dissipation maximum: 4.8 W (18 V in, full brightness, all audio full scale out and RF channels active)
- thermal power dissipation nominal: 4W (12 V in, no outputs, no linked transmitters)
- thermal power dissipation minimum: 2.3 W (6.5V in, both channels in standby)
MECHANICAL SPECIFICATIONS:
- operating temperature range: -18°C to 50°C
- storage temperature range: -29°C to 65°C
- dimensions (H x W x D in mm): 29 x 88 x 108 (no backplate)
- weight: 0.24 kg, without antennas or backplate
- housing: machined aluminum