DPA 4098 CORE ceiling

GENERAL:

• directional pattern: supercardioid
• principle of operation: pressure gradient
• cartridge type: pre-polarized condenser
• frequency response: 20Hz-20 kHz
• effective frequency range +/-2 dB at 20 cm: MicroDot 80Hz-15kHz with 3dB soft boost at 8-15kHz & XLR-3M: 100Hz-15kHz with 3dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80Hz
• sensitivity, nominal, +/-3 dB at 1 kHz: 16 mV/Pa -36dB re. 1V/Pa
• equivalent noise level, A-weighted: typ. 23dB(A) re. 20µPa (max. 26dB(A))
• distortion, THD<1% Legacy: 122dB SPL RMS, 125dB SPL peak
• distortion, THD<1% CORE: 130dB SPL RMS, 133dB SPL peak
• dynamic range Legacy: typ. 102dB
• dynamic range CORE: typ. 110dB
• max. SPL, THD 10%: 135dB SPL peak
• rated output impedance: from MicroDot: 30-40 Ohm
• rated output impedance: from XLR connector or DAD6001-BC XLR Adapter: 100 Ohm
• minimum load impedance: 2 kOhm
• cable drive capability: MicroDot up to 300 m with DAD6001-BC XLR adapter & XLR-3M: up to 100m
• output balance principle: signal balanced with XLR connector or DAD6001-BC XLR adapter
• common mode rejection ratio (CMRR): >60dB from 50Hz to 15kHz with DAD6001-BC XLR adapter
• power supply (for full performance): MicroDot min. 5 V to max. 10 V through DPA adapter for wireless systems or P48 (Phantom Power) with DAD6001-BC XLR adapter OR XLR-3M: P48 (Phantom Power)
• current consumption: typ. 1.5 mA (microphone) & 3.5 mA with DAD6001-BC XLR adapter
• connector: MicroDot or XLR-3M
• color: black or white

WEIGHT:

Microdot:

• 16 cm: 12g
• 28 cm: 20g
• 43 cm: 28g
• 77 cm: 55g
• 122 cm: 67g

XLR-3M:

• 20cm: 75g
• 32cm: 80g
• 47cm: 88g
• 77cm: 115g
• 122cm : 127g

DIMENSIONS:

• microphone diameter: 5.7 mm
• microphone length: Microdot: 16cm, 28cm, 43cm, 77cm, 122cm & XLR-3M: 20cm, 32cm, 47cm, 77cm, 122cm
• polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
• temperature range: -40°C to 45°C
• relative humidity (RH): up to 90%