- Home
- DPA 4011-DF-G
Description
Using the MMC4011 Cardioid Microphone Capsule for its directional quality and attention to detail, this solution makes everything sounds like the original. A complete microphone floor stand solution offering a high-quality stage voice or instrument mic in an elegant and exclusive design.
A flat on-axis frequency response and excellent phase response deliver a faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.
Due to its modular nature, the 4011 Cardioid Microphone Boom can be combined with different lengths of podium booms – 15, 30 or 45 cm. If longer booms are needed for floor stands with visual elegance, DPA long booms at 75 or 120 cm make a high-quality stage voice mic together with DPA dedicated accessories.
4011 Gooseneck Microphones come in five lengths:
- 20 cm, 32 cm and 47 cm boom intended for podium solutions
- 77 cm and 122 cm for floor stand applications
FEATURES:
- Low noise and natural voice
- Highly directional for high isolation
- Uniform, frequency independent directionality
- Exclusive, elegant design
- Integrated shock-mounting in floor base
- Rapidly stabilizing microphone boom pole
- Modular flexibility
Specifications
- Directional Pattern: Cardioid
- Principle of Operation: Pressure gradient
- Cartridge Type: Pre-polarized condenser
- Frequency Response: 20 Hz – 20 kHz
- Effective Frequency Range (±2 dB at 30 cm): 40 Hz – 20 kHz
- Sensitivity (nominal, ±2 dB at 1 kHz): 10 mV/Pa / −40 dB re. 1 V/Pa
- Equivalent Noise Level (A-weighted): Typical: 18 dB(A) re. 20 µPa / Maximum: 20 dB(A)
- Equivalent Noise Level (ITU-R BS.468-4): Typical: 25 dB
- Distortion (THD < 1%): 136 dB SPL RMS / 139 dB SPL peak
- Dynamic Range: Typical 121 dB
- Maximum SPL (THD 10%): 144 dB SPL peak
- Rated Output Impedance: 100 Ω
- Minimum Load Impedance: 2 kΩ
- Cable Drive Capability: 100 m (328 ft)
- Output Balance Principle: Impedance balancing
- Common Mode Rejection Ratio (CMRR): > 40 dB
- Power Supply (for full performance): P48 (Phantom Power)
- Current Consumption: 3.5 mA
- Connector: XLR-3M / Pin 1: Shield / Pin 2: Signal (+ phase) / Pin 3: Signal (− phase)
- Maximum Output Voltage (RMS): 2.2
- Polarity: +V at pin 2 for positive sound pressure
- Dimensions: Microphone diameter: 19 mm / Capsule diameter: 19 mm / Capsule length: 23 mm / Boom pole lengths: 20 cm, 32 cm, 47 cm, 77 cm, 122 cm
- Matching Tolerance (frequency response & sensitivity): ±1 dB
- Phase Deviation for Kit: < 10°
- Temperature Range: −40°C to 45°C
- Relative Humidity (RH): Up to 90%
- Color: Matte black