ZAXCOM QRX235

RECEIVER

• single mode receiver type: true diversity single conversion digital demodulator
• dual mode receiver type: antenna diversity single conversion digital demodulator
• RF modulation: proprietary digital method
• RF frequency range: 518.0 to 692.0MHz (blocks are 20 to 36MHz wide)
• RF frequency step: 100 KHz
• RF bandwidth: 200 KHz
• channel separation: 500 KHz (700 KHz recommended)
• sensitivity: -110dBm
• antenna connector: 50 Ohm SMA female

RECEIVER AUDIO - ANALOG OUTPUT (x 4)

• dynamic range: 114dB
• distortion: 0.001%
• DAC bit-depth: 24bits
• connector: TA-5M
• audio output level (line): -10 to 0 dBm active balanced

RECEIVER AUDIO - DIGITAL OUTPUT (x 4)

• signal format: AES balanced
• audio output connector: TA-5M

IFB transmitter (QIFB)

• RF power output: 50mW
• RF modulation: Digital Spread Spectrum
• RF frequency range: 2.403 to 2.475 GHz
• RF frequency step: 0.001 GHz (1 MHz)
• RF bandwidth: 1 MHz
• channel separation: 2 MHz
• antenna connector: 50 Ohm SMA Female
• emission designator: 180 KV2E

2.4 GHz AUDIO TRANSMITTER (QIFB)

• dynamic range: 103dB
• distortion: 0.01%
• frequency response: 20Hz to 12kHz
• system group delay: 10ms

IFB AUDIO INPUT (QIFB)

• connector: stereo 3.5mm
• type: balanced / unbalanced
• level: -10dBu
• impedance: 10 kOhm
• ADC bit-depth: 24bits
• ADC sampling rate: 48kHz

TIMECODE INPUT (QIFB)

• connector: stereo 3.5mm
• level range: 1 to 5V, P-P
• impedance: 10 kOhm

TIMECODE OUTPUT (QIFB)

• connector: stereo 3.5 mm
• level range: 0.2 to 5V, P-P
• impedance: 8Ohm

TIMECODE READER/GENERATOR (QIFB)

• clock accuracy: 1.54 PPM (1 frame out in 6 hours)
• timecode type: SMPTE
• timecode frame rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

MISCELLANEOUS

• weight: 170 g
• dimensions (in mm): 32 x 83 x 133
• external power: 9 to 18VDC (300mA @ 12VDC)
• internal power: N/A
• display: graphic LCD panel