LECTROSONICS DBSMD/E01-A1B1

Name: LECTROSONICS DBSMD/E01-A1B1
Brand: Lectrosonics
SKU: lec.dbsmde01a1b
Price: 1829.0 EUR
Availability: InStock

€ 1.925,00

list price (excl. VAT)

€ 1.829,00

our price (excl. VAT)

€ 2.213,09

incl. VAT

Out of stock >

ADD TO WISHLIST REMOVE FROM WISHLIST

SKU: lec.dbsmde01a1b

Brand: Lectrosonics

Categories:

Bodypack Transmitters, Lectrosonics

CLICK TO SEE RELATED PRODUCTS

Description
Specifications
In the Box

The DBSM-A1B1 and DBSMD-A1B1 digital transcorders were developed specifically for the needs of the film industry and offer time code jam sync capability. They offer hands free setup and adjustment using audible tones and can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low frequency audio roll-off for 3 dB down points at 20, 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low frequency audio content. The transmitters also offer selectable output power of 10, 25 and 50 mW. A special high-density (HDM) transmit mode at 2 mW allows for ultra-tight channel spacing without concern for frequency coordination.

The input section features the unique Lectrosonics servo bias input circuitry with a standard TA5M type jack for use with electret lavalier mics, dynamic mics or line level signals. A DSP-controlled analog audio limiter is employed ahead of the first mic preamp to protect the entire audio chain from overload. The limiter has a range of more than 30 dB for excellent overload protection and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion of brief transients and longer duration peaks.

A water resistant control panel with LCD, membrane switches and multi-color LEDs make input gain adjustments, frequency and compatibility mode selection quick and accurate. The battery compartment accepts industry-accepted AA batteries (lithium recommended). The housing is machined from solid aluminum blocks to provide an extremely lightweight and rugged package. A special non-corrosive finish resists salt water exposure and perspiration in extreme environments.

RF-intense multichannel and mobile venues must have a broad selection of frequencies available to alleviate interference problems, especially with the emergence of DTV telecasts. Frequencies are selectable in 25 kHz steps across the broad tuning range of each frequency band. Instead of transmitting, the transmitters may also be used as a stand alone recorder. The industry standard .wav (BWF) file format is compatible with essentially any audio or video editing software.

FEATURES:

D Squared digital wireless
selectable output power to maximize
operating range or battery life
ultra-lightweight, corrosion resistant housing
OLED interface with lockout option
servo bias input circuitry
IR (infrared) port for fast setup
alternate use as recorder on internal microSDHC memory card
timecode jam-sync capability with TCXO for <1 ppm accuracy
high density mode for ultra-tight channel spacing

OPERATING FREQUENCIES:

DBSMD(D)/E01-A1B1: 470.100 to 614.375
channel spacing: 25 kHz
RF Power output: DBSM: 2 (HDM only), 10, 25 or 50 mW and DBSMD 2 (HDM only), 10, 25 or 50 mW
compatibility modes: D2 digital with encryption and HDM high density digital with encryption
modulation type: 8 PSK
frequency stability: +/0.002%
spurious radiation: compliant with ETSI EN 300 422-1
equivalent input noise: -125 dBV, A-weighted

INPUT LEVEL:

if set for dynamic mic: 0.5 mV to 50 mV before limiting and greater than 1 V with limiting
if set for electret lavalier mic: 1.7 uA to 170 uA before limiting and greater than 5000 uA (5 mA) with limiting
line level input: 17 mV to 1.7 V before limiting and greater than 50 V with limiting

INPUT IMPEDANCE:

dynamic mic: 300 Ohms
electret lavalier: input is virtual ground with servo adjusted constant current bias
line level: 2.7 kOhms
input limiter: soft limiter, 30 dB range
bias voltages: fixed 5 V at up to 5 mA
selectable 2 V or 4 V servo bias for any electret lavalier
gain control range: -7 to 44 dB, panel mounted membrane switches
modulation indicators: dual bicolor LEDs indicate modulation -20, -10, 0, +10 dB referenced to full modulation
controls: control panel w/ LCD and 4 membrane switches
low frequency roll-off: adjustable from 20 to 150 Hz

INPUT:

type: analog mic/line level compatible, servo bias preamp for 2V and 4V lavalier microphones
input level (dynamic): 0.5 mV to 50 mV
input level (electret): nominal 2 mV to 300 mV
line level (line): 17 mV to 1.7 V
input connector: TA5M 5-pin male

AUDIO PERFORMANCE:

frequency response: 20Hz to 20kHz, +/1dB: Encrypted Digital Mode 20Hz to 11.3KHz, +/3dB: High Density (HD) Mode (CH)
dynamic range: 110 dB (A), before limiting
distortion: < 0.035%
antenna: flexible, unbreakable steel cable
battery: AA (+1.5 VDC), disposable, Lithium recommended

BATTERY LIFE DBSM-A1B1 (1 AA):

Lithium (2mw, 10mw, 25mw, 50mw): 8h55min, 17h25min, 9h35min, 4h45min
Alkaline (2mw, 10mw, 25mw, 50mw): 2h15min, 2h, 1h25min, 1h10min
NiMH (2mw, 10mw, 25mw, 50mw): 5h25min, 4h55min, 4h25min, 4h20min

BATTERY LIFE DBSMD-A1B1 (2 AA):

Lithium (2mw, 10mw, 25mw, 50mw): 18h20min, 16h35min, 15h10, 12h10
Alkaline (2mw, 10mw, 25mw, 50mw): 7h45min, 7h10min, 6h20m, 4h30min
NiMH (2mw, 10mw, 25mw, 50mw): 10h55min, 10h30min, 9h20m, 7h25min

GENERAL:

weight w/ battery(s): DBSM-A1B1 90.719 g and DBSMD-A1B1: 136.078 g
overall dimensions (without microphone in mm): DBSM-A1B1 60.096 x 49.632 x 16.307 and DBSMD-A1B1 60.096 x 62.865 x 16.307
emission designator: DBSM-A1B1/DBSMD-A1B1: 170KG1E

RECORDER:

storage media: microSDHC memory card
file format: .wav files (BWF)
A/D converter: 24-bit
sampling rate: 48 kHz
recording modes/bit rate:
HD mono mode: 24 bit to 144 kbytes/s

INPUT (RECORDER):

type: analog mic/line level compatible, servo bias preamp for 2V and 4V lavalier microphones
input level (dynamic): 0.5 mV to 50 mV
input level (electret): nominal 2 to 300 mV
input level (line): 17 mV to 1.7 V
input connector: TA5M 5-pin male

AUDIO PERFORMANCE (RECORDER):

frequency response: 20Hz to 20kHz, +/1dB
dynamic range: 121dB(A)
distortion: <0.035%
operating temperature range: -20 to 50°

RECORDING TIME:

8GB: 11h10min
16GB: 23h00min
32GB: 46h10min

LECTROSONICS DBSMD/E01-A1B1

Description

Specifications

In the Box

We found other products you might like!

ADDRESS

NAVIGATION

OPENING HOURS

SIGN UP FOR OUR NEWSLETTER

LECTROSONICS DBSMD/E01-A1B1

Have a question?

Description

Specifications

In the Box

Accessories

We found other products you might like!

Compare

ADDRESS

NAVIGATION

OPENING HOURS

SIGN UP FOR OUR NEWSLETTER