LECTROSONICS SRc5P

Name: LECTROSONICS SRc5P
Brand: Lectrosonics
SKU: lec.src5p-a1
Price: 2777.0 EUR
Availability: InStock

€ 2.839,00

list price (excl. VAT)

€ 2.777,00

our price (excl. VAT)

€ 3.360,17

incl. VAT

Frequency Band: Block A1 - 470.100 to 537.575 MHz (ch 21 to 29)

Block A1 - 470.100 to 537.575 MHz (ch 21 to 29)

Block B1 - 537.600 to 614.375 MHz (ch 29 to 39)

Block B2 - 563.200 to 639.975 MHz (ch 32 to 42)

Block C1 - 614.400 to 691.175 MHz (ch 39 to 48)

Block C2 - 640.000 to 716.700 MHz (ch 42 to 51)

Out of stock >

ADD TO WISHLIST REMOVE FROM WISHLIST

SKU: lec.src5p-a1

Brand: Lectrosonics

Categories:

Lectrosonics, Portable Receivers

CLICK TO SEE RELATED PRODUCTS

Description
Specifications
In the Box

The SRc5P dual channel receiver consists of two separate receivers built into a single, ultra compact housing with adapters for video camera receiver slots and for stand-alone use. "Digital Hybrid Wireless" technology provides superb, compandor-free audio quality and compatibility with other wireless systems. The RF performance is extremely stable over a very wide temperature range, making the receiver perfectly suited to the rough environmental conditions found in field production.

"Digital Hybrid Wireless" combines 24-bit digital audio with an analog FM radio link to provide outstanding audio quality and the extended operating range of the best analog wireless systems. The design overcomes channel noise in a dramatically new way, digitally encoding the audio bitstream in the transmitter and decoding it in the receiver, yet sending the encoded information via an analog FM wireless link. This proprietary DSP algorithm eliminates a compandor circuit and its artifacts and preserves the RF spectral footprint of analog FM designs to simplify multi-channel coordination with exisiting analog wireless systems.

DSP compatibility modes allow the receiver to be used with a variety of Lectrosonics systems, other brands of wireless systems and with Lectrosonics IFB transmitters.

The SRc5P, compared to the SRc, has an audio output connector on its top panel. This output can be used with certain cameras that do not accept 2 channel audio passing through their wireless receiver slot. In this case the missing audio channel can be connected with a cable going from the top panel output directly into one of the camera's audio inputs.

FEATURES:

fits camera "slots," Lectrosonics Duopack & QuadPack adapter and Octopack multicoupler, and operates stand-alone with various adapters
tunes over a 75MHz range (3 blocks)
dual receiver design for two channels with phase switched diversity or single channel with ratio diversity operation
"Digital Hybrid Wireless" with compatibility modes for use with other transmitters
tracking front-end filters for high performance in tough RF environments
LCD with RF spectrum scanning
SmartSquelch DSP-controlled, noise based filtering and squelch
DSP-based pilot tone for squelch control
IR sync port for quick transmitter setup (LMb, LT, SMWB, SMDWB, HHa, HMa, & SSM)
SmartTune operation for quick and confident frequency selection
additional top panel audio output
weight 225g

OPERATING FREQUENCIES:

band A1: 470.100 to 537.575 MHz
band B1: 537.600 to 614.375 MHz
band B2: 563.200 to 639.975 MHz
band C1: 614.400 to 691.175 MHz

frequency selection steps: selectable, 100 kHz or 25 kHz
receiver type: dual conversion, superheterodyne
IF frequencies: ch.1: 248.450 MHz and 350.000 kHz & ch. 2: 243.950 MHz and 250.000 kHz
frequency stability: aprox. 0.001%
front end bandwidth: 20 MHz @ -3 dB
sensitivity: 20 dB SINAD 1.0 uV (-107 dBm), A weighted and 60 dB quieting 2.2 uV (-100 dBm), A weighted
squelch quieting: greater than 100 dB typical
AM rejection: greater than 60 dB, 4 uV to 1 Volt
modulation acceptance: 85 kHz
image and spurious rejection: 85 dB
third order intercept: 0 dBm
diversity method: SmartDiversity phased antenna combining or Ratio Diversity using both receivers for a single audio channel
FM detector: Digital Pulse Counting Detector operating at 250 and 350 kHz
RF spectrum analyzer: coarse and fine scanning modes for RF spectrum site survey
antenna inputs: 50 Ohm, SMA female connectors

audio output connectors: interchangeable D connector adapters for camera slot interfaces, dual TA3 male (mini XLR) balanced output adapter & balanced output adapter with fixed cables
front panel audio output (5P model): control panel TA5M with two balanced outputs
audio output level: adjustable -50 to +5 dBu in 1 dB steps, unbalanced output is 6 dB lower
audio channel crosstalk: -80 dB or better
front panel controls: sealed panel with membrane switches & LCD monitors pilot tone, antenna phase, receiver battery level, transmitter battery status, audio level, RF level
audio test tone: 1 kHz, -50 dBu to +5 dBu output (bal), 1% THD
transmitter battery type selection: 9V alkaline, 9V lithium, AA alkaline, AA lithium, NiMH
phase invert: audio output phase normal or inverted

compatibility modes:
NA HYBR North American Digital Hybrid Wireless
NU HYBR ETSI compliant Nu Digital Hybrid Wireless
MODE 3 other manufacturer*
200 SER 200 series transmitters
100 SER 100 series transmitters
MODE E other manufacturer*
EU HYBR European Digital Hybrid Wireless
300 SER 300 Series transmitters (European)
MODE 7 other manufacturer*
MODE 6 other manufacturer*
IFB SER Standard IFB mode

*contact the factory for details on other manufacturers

SmartNR (noise reduction): OFF, NORMAL, FULL modes (available in Digital Hybrid mode only)

AUDIO PERFORMANCE (OVERALL SYSTEM):

frequency response: 32 Hz to 20 kHz (aprox. 1dB)
THD: 0.15% (system) typical in Digital Hybrid mode

system dynamic range:
Smart-NR: OFF, NORMAL, FULL
no limiting: 103.5, 107.0, 108.5
with limiting: 108.0, 111.5, 113.0

rear panel controls and features: audio output connectors & external DC input
powering and current consumption (min. 7 V to max. 18 Volts DC, 2.6 W): 145 mA at 18 VDC & 290 mA at 7 VDC
runtime with SRBATTSLED adapter: 7.2 V, 2200 mAH "L" style battery will typically provide over 7 hours of operation
transmitter battery level tracking: LCD display with battery icon or timer readout
operating temperature: -20°C to +50°C
weight: 225 g with SREXT adapter
overall dimensions (W x H x D in mm with SREXT adapter): 74 x 31 x 125 |

LECTROSONICS SRc5P

Description

Specifications

In the Box

ADDRESS

NAVIGATION

OPENING HOURS

SIGN UP FOR OUR NEWSLETTER

LECTROSONICS SRc5P

Have a question?

Description

Specifications

In the Box

Accessories

Compare

ADDRESS

NAVIGATION

OPENING HOURS

SIGN UP FOR OUR NEWSLETTER