SCHOEPS CMC 1 U Desert Island Stereo Set with MK 2H

article code
sch.134209
Schoeps CMC 1 U Desert Island Stereo Set with MK 2H, incl. 2x CMC 1 U amplifier, 2x MK 2H matched omni with mild high frequency emphasis, medium distance capsule, 2x SG20 clamp and Peli Case 1010 with insert
€ 2,786.00 List Price
Special Price € 3,101.23 Our Price € 2,563.00 Our Price Regular Price € 3,371.06 Our Price

Schoeps now offers the best-selling modular microphone series Colette in as a matched set in a handy and robust Peli Case.

THIS SET INCLUDES:

  • 2x CMC 1 U microphone amplifiers
  • 2x MK 2H matched omni capsules
  • 2x SG 20 stand clamps
  • Peli Case
  • certificate of matching for the capsules

CMC 1 U:

The CMC 1 is a small Colette microphone amplifier, about one-third the size and 40% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

Uncompromising miniaturization means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6. Through modern electronic design, these outstanding electrical properties have been achieved:

  • high maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
  • very low current consumption: 2.0 mA at 48 Volts
  • operates on 48 V or 12 V phantom power, reliable operation even if powering is somewhat marginal
  • very high immunity from RF interference with the Schoeps RFI Shield, high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
  • flat frequency response
  • very low distortion constant output impedance across the audio frequency range balanced, direct-coupled, class-A output circuit
  • output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

A complete Colette-series microphone consists of an MK capsule and a CMC amplifer. All capsules and active accessories of the Colette system are compatible with the CMC 1. The CMC 1 works with standard 12-Volt or 48-Volt phantom powering. Power consumption is lower at 12 Volts, an advantage for battery-powered operation.

CMC 1 U FEATURES:

  • complete alternative to the renowned CMC 6
  • fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes
  • suitable mounting accessories are already available, such as the CINELA E-OSIX-CMC1U and the Rycote INV-6 elastic suspensions.

MK 2H:

If this microphone capsule is used indoors at medium recording distances (i.e. where direct sound energy is similar in amount to reflected sound energy), its overall response will be linear. Its extended frequency response and low noise make it appropriate for the most demanding applications.

The sound inlet of the MK 2H is narrower than that of our other pressure transducers, causing a slight, purely acoustic response elevation above 6 kHz. This reduces the high frequency loss for diffuse sound, thus helping to preserve natural sound quality.

The gold-plated ring reduces the size of the acoustic opening of the MK 2H. This results in an acoustic elevation above 6 kHz. The MK 2H is a capsule often described as balanced and round. Together with the KA 40 sphere accessory, it forms a classic Decca Tree capsule.

MK 2H FEATURES:

  • mild high-frequency response elevation at 0°, which compensates high frequency losses caused by a slightly increased diffuse field amount at medium recording distance
  • ideal for A/B stereophony and Decca Tree

CMC 1 U SPECIFICATIONS:

  • frequency range: 20 Hz-20 kHz
  • maximum output voltage: 1,8 V (5 dbV) with 1 kOhm load
  • maximum sound pressure level (THD < 0.5 %): 135 dB-SPL (P48) with MK 4, 131 dB-SPL (P12) with MK 4
  • low cut filter: 20 Hz, 12 dB/oct
  • output impedance: 50 Ohm approx. 1 Ohm (8 Hz 50 kHz)
  • minimum recommended load impedance: 1 kOhm
  • common mode rejection ratio (at 1 kHz): > 55 dB
  • maximum cable length: > 400 m
  • Schoeps RFI shield: yes
  • powering standard / valid range: P48 / 30-52 V, P12 / 11-13 V
  • current consumption: 2 mA (P48), 3 mA (P12)
  • output: XLR-3M, analog, 1 channel
  • length: 39 mm
  • diameter: 20 mm
  • weight: 36 g
  • surface finish: matte grey (g) or custom color

MK 2H SPECIFICATIONS:

  • frequency range: 20Hz to 20kHz
  • sensitivity: 15mV/Pa
  • equivalent noise level (A-weighted): 11dB-A
  • equivalent noise level (CCIR): 23dB
  • signal-to-noise ratio (A-weighted): 83dB-A
  • maximum sound pressure level at 0.5% THD: 130dB-SPL
  • length: 22mm
  • diameter: 20mm
  • weight: 17g

More Information
BrandSchoeps
THERE ARE 2 OPTIONS AVAILABLE:
1. Pick-up your order at our store.
2. Choose one of the different options from our shipping partners, presented to you during check-out.