NEUMANN KH 310 ARG
article code
ne.kh310arg
Neumann KH310 ARG 3-way, right-side active near-field reference monitor, analog XLR input, metallic anthracite
€ 2,294.99 Our Price € 1,896.69 Our Price
The KH 310 three-way active tri-amplified monitor features a mathematically modeled dispersion waveguide (MMDT), flexible acoustical controls, various input options and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 310 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.
The KH 310 is designed for use as a near-field monitor, as a front loudspeaker in mid-sized multi-channel systems, or as a rear loudspeaker in a larger multi-channel system. It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering.
FEATURES:
- quickest transient response of its class
- tremendous bass capability down to 34 Hz
- higher precision in the midrange through a specially designed driver
- powerful alloy fabric dome
- elliptical mathematically modeled dispersion (MMDT) waveguide, with wide horizontal and narrow vertical dispersion
- new in-house simulated drivers
- fabric dome, neodymium magnet, midrange driver
- long throw composite sandwich cone bass driver with extremely linear force factor (ELFFT) and ribbed surround
- two-color + dimmable Neumann logo
- compact sealed three-way cabinet design (magnetically shielded)
- one-piece front panel with no discontinuities
- powerful analog class AB amplifiers with large headroom
- independent thermo limiters for woofer, midrange dome and tweeter to protect the voice coils
- woofer soft clip and excursion limiters
- production consistency due to individual hand-alignment in final test
- 4-position bass, low-mid and treble acoustical controls
- wide range input gain and output level controls
- ground lift
- universal switched-mode power supply (100-240V)
- extensive mounting hardware options
- optional robust metal grille
- optional transportation accessories
PERFORMANCE:
- free field frequency response +/6 dB: 30 Hz up to 22 kHz
- free field frequency response +/3 dB: 34 Hz up to 21 kHz
- free field frequency linearity deviation between 100 Hz and 10 kHz: +/1.1 dB
- reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced: +/0.87, +/0.39, +/0.23 dB
- self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL
- sine wave output with a THD < 0.5 % at 1 m in half space: 95 dB SPL (>85 Hz)
- max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 116.3 dB SPL
- max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 110.3 dB SPL
- bass capability: max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 104.5 dB SPL
- max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 113 dB(C) SPL
- max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range): 100 dB(C) SPL
- max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer): 107 dB(C) SPL
- max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 93 / 99 dB(C) SPL
- max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) 94 / 100 dB(C) SPL
- analog input(s): XLR, analog electronically balanced
- analog input impedance: >13k Ohms
- max. input level: +24 dBu
- common mode rejection ratio (CMRR): >56 dB @ 15kHz
- input gain control (sensitivity): 0 dB up to -15 dB
- output level control (output level in 1 m based on 0 dBu input level): 94, 100, 108, 114 dB SPL
- controller design: analog, active
CROSSOVER:
- crossover frequency: 650 Hz and 2.0 kHz
- crossover slope: 24 dB/oct, 4th order
POWER:
- output power woofer amplifier (THD+N with limiter deactivated: 10%): 210 W
- output power midrange amplifier (THD+N with limiter deactivated: 10%) : 90 W
- output power tweeter amplifier (THD+N with limiter deactivated: 10%): 90 W
- output power woofer amplifier (THD+N with limiter deactivated: 0.1%): 150 W
- output power midrange amplifier (THD+N with limiter deactivated: 0.1%) 70 W
- output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) 70 W
- mains power supply, input voltage, frequency: 100-240V, 50/60 Hz
- power consumption (230 V / 100 V), idle: 24 W
- power consumption (230 V / 100 V), full output: 300 W
GENERAL:
- cabinet material: polyurethane front, wooden sleeve, aluminum electronics panel
- cabinet surface finish, color (front / back): painted, metallic anthracite (RAL 7021) / black (RAL 9005)
- operating conditions: +10° C to +40° C, <90% RH, non-condensing
- transport/storage conditions: -25° C to +70° C, <90% RH, non-condensing
- woofer: 210 mm magnetically shielded
- midrange: 75 mm with magnetic shielding
- tweeter: 25 mm with protecting black metal grille
- mounting points: 2 x M8 on side panels, thread depth from outside of cabinet 25 mm, rear panel screws for attaching LH 41 base plate
- product dimensions (height x width x depth): 253 x 383 x 292 mm
- external net volume: 28.3 liters
- product weight: 13.0 kg
PACKAGING:
- packed dimensions (height x width x depth), mm: 360 x 380 x 590 mm
- packed weight: 16.8 kg
| Brand | Neumann |
|---|
