DPA ST4011A
Even though the standard tolerances on our d:dicate microphones are extremely low, a stereo match is even closer. These specially selected d:dicate 4011A microphones are matched within +/-1dB on both frequency response and sensitivity. The pair comes in a heavy-duty Peli Case for safe transportation and easy access to the microphones and accessories. This condenser microphone is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.
The microphone capsule: the principal appeal of the MMC4011 cardioid microphone capsule is its directional quality and attention to detail. This mic makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources. It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound levels and even includes a 20dB pad switch in the center of the XLR connector to attenuate the output of the microphone. A flat on-axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.
A truly flexible range: this mic is part of the flexible d:dicate microphone series. At any time, and with no tools needed, it is possible to transform the d:dicate 4011A cardioid microphone into a new configuration. You can combine it with another d:dicate or d:facto microphone capsule or preamplifier. The d:dicate 4011A omnidirectional microphone is also available individually.
FEATURES:
- close-miking
- great for high sound levels
- carefully matched within +/-1dB
- accurate sound
- colorless sound
- peli case transportation and protection
- modular flexibility
- Directional pattern: cardioid
- Principle of operation: pressure gradient
- Cartridge type: pre-polarized condenser
- Frequency range: 20Hz to 20kHz
- Frequency range, +/-2dB: 40Hz to 20kHz
- Sensitivity, nominal, +/-2dB at 1kHz: 10mV/Pa, -40dB re. 1V/Pa
- Equivalent noise level, A-weighted: typ. 18dB(A) re. 20uPa (max. 20dB(A))
- Equivalent noise level, ITU-R BS.468-4: typ. 25dB
- S/N ratio (A-weighted), re. 1kHz at 1Pa (94dB SPL): typ. 76dB(A)
- Total harmonic distortion (THD): <1% up to 139dB SPL peak
- Dynamic range: typ. 121dB
- Max. SPL, peak before clipping: 159dB
- Switchable attenuator, filters etc.: 0dB / -20dB
- Output impedance: 200Ohm
- Minimum load impedance: 2kOhm
- Cable drive capability: 100m
- Output balance principle: Impedance balancing with "Active Drive"
- Common mode rejection ratio (CMRR): >60dB
- Power supply (for full performance): 48V Phantom power (+/-4V)
- Current consumption: 2.8mA
- Connector: XLR-3M. pin 1: shield, pin 2: signal + phase, pin 3: phase
- Color: matte black
- Weight: 158g
- Microphone/capsule diameter: 19/19mm
- Microphone length: 170mm
- Maximum output voltage, RMS: >5V
- Polarity: +V at pin 2 for positive sound pressure
- Temperature range: -40°C to 45°C
- Relative humidity (RH): up to 90%
- Matching tolerance (frequency response and sensitivity): +/-1dB
- Phase deviation for kit: <10°
| Brand | DPA |
|---|
