DPA 4090
The d:screet 4090 omnidirectional microphone, hi-sens, P48 is a high-quality omnidirectional condenser microphone. Due to its uniquely natural and open sound, the 4090 is suitable for instrument-miking applications in the studio or on the stage.
With 134dB SPL handling, this microphone can be used with essentially any instrument from acoustic guitar and strings to piano and wind instruments. Due to their remarkably linear frequency response in the 20Hz to 20kHz range, sound system engineers can also use these mics for sound system alignment, testing and tuning.
The rugged and compact design features a 5.4mm diameter pre-polarized condenser capsule in a tapered body measuring just 12cm.
Features:
- Natural and open sound
- For instrument-miking in the studio or on the stage
- For acoustic guitar, strings, piano and wind instruments
- directional pattern: omni-directional
- principle of operation: pressure
- cartridge type: pre-polarized condenser
- frequency range: 20Hz to 20kHz
- frequency range, +/-2dB: 20Hz to 20kHz
- sensitivity, nominal, +/-3dB at 1kHz: 20mV/Pa, -34dB re. 1V/Pa
- equivalent noise level, A-weighted: typ. 23dB(A) re. 20uPa (max. 26dB(A))
- equivalent noise level, ITU-R BS.468-4: typ. 35dB (max. 38dB)
- total harmonic distortion (THD) <1%: 120dB SPL RMS, 123dB SPL peak
- dynamic range: typ. 100dB
- max. SPL, peak before clipping: 134dB
- output impedance: < 40 Ohm
- cable drive capability: 100m
- output balance principle: impedance balanced
- common mode rejection ratio (CMRR): >40dB
- power supply (for full performance): 48V phantom power +/-4V
- current consumption: 2mA
- connector: XLR
- weight: 38g
- microphone diameter: 6.7 to 19mm
- microphone length: 122mm
- polarity: +V at pin 2 for positive sound pressure
- temperature range: -40°C to 45°C
- relative humidity (RH): up to 90%
Brand | DPA |
---|