DPA 4061 stereo kit
article code
d.kit4061ocsmk
DPA 4061 CORE stereo microphone kit with 2x 4061 omni-directional microphones, black
€ 1,010.00 List Price
€ 1,159.00 Our Price € 957.85 Our Price
Similar in content to the 4060 stereo microphone kit, this kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage. It contains a complete stereo pair, two handpicked omnidirectional condenser microphones, selected on sensitivity within +/-1.5dB. It combines two 4061 miniature omnidirectional microphone, loud SPL, with a variety of mounting accessories for use with high SPL sources.
FEATURES:
- extremely rugged and reliable
- exceptional audio quality
- low noise and high sensitivity
- large selection of accessories
- modular adapter system fits most professional wireless systems
INCLUDED WITH:
- 2x 4061-OL-C-B00: 4061 CORE Omni Mic, Loud SPl, black
- 1x BLM6000 boundary layer mount
- 2x DAD6001BC Microdot to XLR adapter
- 2x DMM0007 surface mount
- 2x DMM0011B magnet mount
- 1x DUA0560 foam windscreens, 5pcs.
- 2x MHA6005 holder for strings
- directional pattern: omnidirectional
- principle of operation: pressure
- cartridge type: pre-polarized condenser
- frequency range: 20Hz-20kHz
- frequency range, +/-2dB: soft boost grid (20Hz-20kHz), 3 dB soft boost at 8-20kHz, high boost grid (20Hz-20kHz), 10 dB boost at 12 kHz
- sensitivity, nominal, +/-3dB at 1 kHz: 6 mV/Pa, -44 dB re. 1 V/Pa
- equivalent noise level, A-weighted: typ. 26 dB(A) re. 20 Pa (max. 28 dB(A))
- equivalent noise level, ITU-R BS.468-4: typ. 38 dB (max. 40 dB)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): typ. 68 dB(A)
- total harmonic distortion (THD)-Legacy: <1% THD up to 123dB SPL peak, <1% THD up to 120dB SPL RMS sine
- total harmonic distortion (THD)-CORE: <1% THD up to 137dB SPL peak
- dynamic range-Legacy: typ. 97dB
- dynamic range-CORE: typ. 111 dB
- max. SPL, peak before clipping: 144 dB
- output impedance: 30-40 Ohm
- cable drive capability: up to 300m
- power supply (for full performance): for wireless systems, min. 5V-max. 50V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099, 48V phantom power +/-4 V for full performance
- connector: MicroDot
- color: black, beige, brown or white
- weight: 7.5 g incl. cable and MicroDot connector
- microphone diameter: 5.4 mm
- microphone length: 12.7 mm
- cable length: 1.8 m
- polarity: positively increasing sound pressure produces positive going voltage on MicroDot pin
- temperature range: -40°C to 45°C
- relative humidity (RH): up to 90%
| Brand | DPA |
|---|
