DPA 4018A
d:dicate 4018A supercardioid microphone.
- Highly directional supercardioid
- Uniform, frequency independent directionality
- Low noise and high sensitivity for distant positioning
- Excellent for spot miking orchestra sections or singers
The 4018A is a highly directional, first-class supercardioid microphone and is a part of the modular DPA d:dicate recording microphones series.
With its remarkably well controlled supercardioid shape and uniform off-axis frequency response, the 4018A offers high separation without odd off-axis frequency peaks and dips. The supercardioid shape is frequency independent, securing an identical sound color around the microphone. The usual rear lobe heard on most supercardioids is minimized on the 4018A making it much more isolated.
Designed for a broad range of music recording and broadcast/ENG/film long-distance miking applications, such as booming, dialogue, interview and table or spot-recording use, the 4018A also offers superb expandability through modular accessories. The 4018A is ideal for use as spot or hanging mic for orchestra recording situations.
- Directional pattern: supercardioid
- Principle of operation: pressure gradient
- Cartridge type: pre-polarized condenser
- Frequency range: 20Hz to 20kHz
- Frequency range, +/-2dB: 40Hz to 18kHz
- Sensitivity, nominal, +/-2dB at 1kHz: 12mV/Pa, -38.4dB re. 1V/Pa
- Equivalent noise level, A-weighted: typ. 16dB(A) re. 20uPa (max. 19dB(A))
- Equivalent noise level, ITU-R BS.468-4: typ. 23dB (correct with the attenuator in 0 dB or -20 dB setting)
- S/N ratio (A-weighted), re. 1kHz at 1Pa (94dB SPL): typ. 78dB(A)
- Total harmonic distortion (THD): <1% up to 137dB SPL peak
- Dynamic range: typ. 121dB
- Max. SPL, peak before clipping: 156dB
- Switchable attenuator, filters etc.: 0dB / -20dB
- Output impedance: 200Ohm
- Minimum load impedance: 2kOhm
- Cable drive capability: 100m
- Output balance principle: Impedance balancing with "Active Drive"
- Common mode rejection ratio (CMRR): >60dB
- Power supply (for full performance): 48V Phantom power (+/-4V)
- Current consumption: 2.8mA
- Connector: XLR-3M. pin 1: shield, pin 2: signal + phase, pin 3: phase
- Color: matte black
- Weight: 158g
- Microphone/capsule diameter: 19/19mm
- Microphone length: 170mm
- Maximum output voltage, RMS: >8V
- Polarity: +V at pin 2 for positive sound pressure
- Temperature range: -40°C to 45°C
- Relative humidity (RH): up to 90%
- Matching tolerance (frequency response and sensitivity): +/-1dB
- Phase deviation for kit: <10°
| Brand | DPA |
|---|
